LYNX Concrete Coatings

Salt and deicers used on roads and sidewalks can wreak havoc on your concrete garage floor. The salt and brine solutions seep into the concrete, causing pitting, cracking, spalling, and unsightly white stains. If left unchecked, the damage worsens each winter and can lead to costly repairs.

The good news is you can take action now to prevent further damage, clean up existing stains, make repairs, and protect your garage floor from future salt exposure with the help of Lynx Concrete Coatings, experts in concrete coating. This guide will walk you through the causes, effects, cleaning, repair, and prevention of road salt damage on bare concrete garage floors.

What Causes Salt Damage on Concrete Garage Floors?

Salt damage on garage floors is most commonly caused by road salt and deicing fluids that are tracked inside on vehicles. Salts and deicers, including magnesium chloride and calcium chloride, are acidic and will corrode, pit, and spall bare concrete upon contact over time.

Here's how it happens:

When ice melts from deicers, a brine solution is formed. This brine seeps into the pores and capillaries of the concrete, rather than freezing on top.

When temperatures drop again, the moisture inside the concrete freezes and expands. This freezes/thaw cycle fractures the concrete through a process known as spalling.

Subflorescence also occurs as moisture evaporates, leaving salts to recrystallize just below the surface. This builds up over time.

The road salt also reacts with calcium hydroxide in the concrete to form calcium oxychloride crystals. These crystals expand and damage the concrete.

Even plain water that freezes overnight can cause similar damage to concrete without any salt. The salt just accelerates the process.

The result is a pitted, cracked, and spalled garage floor - often with white stains left behind on the surface. The damage will only get worse year after year if the concrete remains unsealed and unprotected.

Signs of Salt Damage on Your Garage Floor

How can you tell if your concrete garage floor is suffering from road salt damage? Here are some key signs to look for:

Surface pitting - Small pits, craters, and voids start forming in the concrete from spalling.

Cracking - Salt corrosion causes surface cracks and fractures to form.

Spalling - Flakes of concrete break loose, leaving behind gaps and cavities.

White residue - Salt and mineral deposits appear as a white haze or powdery efflorescence.

Dusting - The top layer of concrete slowly erodes into a fine dust.

Discoloration - Concrete can turn white where heavy salt exposure has occurred.

If you notice any of these signs after the winter season, you likely have salt damage that needs addressed. The longer you wait, the more the concrete will deteriorate.

How to Remove Salt Stains from Concrete

Cleaning up those unsightly white salt stains is one of the first steps in repairing winter damage. Here is an effective process:

1. First, clean the entire garage floor well so you can see all the salt stains. Do NOT use high-pressure water, as this will drive the salts deeper into the concrete.

2. Mix up a cleaning solution of 1 part vinegar to 1 part warm water. Add a small amount of dish soap.

3. Apply the vinegar solution liberally on the salt stains. Let it sit for 3-5 minutes to penetrate.

4. Gently scrub the salts with a stiff bristle brush or broom.

5. Use a wet/dry vacuum to extract the solution from the concrete. This prevents the salts from redepositing.

6. Rinse the floor with clean water and vacuum up the rinse water as well.

For particularly stubborn stains, products such as Salt-Away work very well. Sometimes a mild muriatic acid etch is needed for heavy salt buildup. Always test acids first and neutralize.

It often takes several rounds of cleaning to fully extract embedded road salts. The key is having patience and using the vacuum extraction method to pull salts out of the concrete.

It's critical to apply a protective sealer or coating after cleaning to prevent future salt penetration. We'll cover that shortly.

Repairing Winter Damage on Your Garage Floor

After a thorough cleaning, inspect the concrete for any damage that may need repaired. Pay attention to areas with pitting, voids, and spalling.

For minor repairs, polymer-modified cement patching compounds work very well:

They bond tighter than standard cement products.

Less likely to crack, delaminate, or pop out from the floor.

Flexible and resistant to damage.

Various drying times available.

For more heavy-duty repairs, consider using an epoxy slurry:

Made from epoxy resin binder and concrete powder.

Cures strong, solid, and durable.

Bonds extremely well for repairs.

Can be featheredged.

Stands up to vehicular traffic and abuse.

Consult with your concrete coating contractor on the best patching and repair products for your needs. Proper surface prep is key to success.

Protect and Prevent Future Salt Damage

Now that you've cleaned and repaired your concrete flooring, it's crucial to take steps to prevent salt and winter damage going forward.

Applying a protective coating or sealer is highly recommended. Here are your options:

Penetrating Sealers

Silane/Siloxane - Repels water and salt solutions at the surface.

Siliconate Sealer - Densifies + repels. Provides the best protection for bare concrete.

Acrylic - Limited protection, needs frequent reapplication.

Topical Coatings

Epoxy - Excellent resistance to salt, chemicals, impacts.

Polyaspartic - Superior UV stability, fast return to service.

Polyurea - Most durable, flexible, rapid installation.

Containment Mats

Heavy-duty mats collect fluids that vehicles track in. Keeps concrete clean and dry.

For best results, combine a high-quality sealer with a polyurea or polyaspartic coating installed by a professional contractor. This provides full protection against salt damage on your garage floor.

Frequently Asked Questions

Why does salt keep damaging my floor after I clean it?

This usually occurs when salt residues are still trapped deep within the concrete pores. Additional cleaning is required to fully extract the salts. Applying a protective coating will prevent any remaining salts from reaching the surface.

How can I tell if I have salt damage?

Signs to look for are surface pitting, cracks, voids, spalling, efflorescence, and white discoloration. Damage usually appears after winter in areas where vehicles are parked.

Is pressure washing safe for cleaning salt stains?

No, you should always avoid high pressure. The water jet will drive more salt deeper into the concrete, making stains worse.

What is the best salt stain cleaner for concrete?

For home use, a mix of vinegar, warm water, and dish soap works well. Commercial products like Salt-Away are also effective cleaners.

How do I know if my concrete needs repairs?

Inspect for pitting, cracks wider than 1/4 inch, loose chunks of concrete, voids, and spalling. Prodding with a screwdriver can help identify hollow, damaged areas.

What is the easiest way to prevent salt damage?

Applying a quality topical sealer or coating provides the easiest protection compared to cleaning and repairs. Siliconate sealers are easy for DIY application.

How often should I reapply a sealer or coating?

Silane/siloxane sealers last 1-3 years typically. Epoxy/polyaspartic coatings last 3-5 years on garage floors before needing renewal. Inspection helps determine if renewal is needed.

What are signs my sealer is failing and needs reapplied?

You may notice moisture absorption, salt efflorescence, tire tracking, staining, loss of gloss, and reduced slip resistance as indicators a recoat is needed.

Is salt damage a DIY repair or should I hire a pro?

For best results, hire a professional concrete contractor to evaluate, clean, patch, and install protective coatings. This provides the longest-lasting protection.

How much does it cost to repair and protect my garage floor?

Costs vary based on coating type and the extent of repairs needed. Many contractors offer free consultations to assess your needs. Expect $4-8 per sq.ft. for a professional coating system.

Conclusion

Salt damage in garages happens gradually over time during winter months as deicers corrode concrete. Preventing salt exposure with a high-quality sealer or coating system is key, along with diligent cleaning when stains appear. For concrete that's already sustained salt damage, proper cleaning, patching, and installation of a protective barrier will stop further deterioration in its tracks.

Don't wait until it's too late - severely damaged concrete is much more difficult and expensive to restore. Consult with a professional contractor this season to inspect your garage floor and implement a personalized plan. Protect your valuable concrete investment against salt damage for years to come. For a free estimate on concrete floor coating systems for your garage, contact Lynx Concrete Coatings today at 855-331-2050 or fill out our free estimate form online.